Ventilation & MVHR in Dublin
Compare up to 4 ventilation & mvhr professionals in Dublin. Free, no obligation.
Dublin's housing stock is Ireland's most diverse, spanning from Georgian terraces in the city centre (1750s-1830s) through Victorian and Edwardian suburbs (1840s-1910s), inter-war and post-war council housing (1930s-60s), suburban estates (1960s-2000s), Celtic Tiger apartments (1998-2008), and modern high-density developments. Each era presents distinct characteristics for home service providers: Georgian homes have solid brick walls, original timber floors, and sash windows. 1960s-70s suburban semis have cavity block walls, often with minimal insulation, and are the most common candidate for energy retrofits. Celtic Tiger-era apartments may have building defects from the construction boom. The sheer density and variety of Dublin housing means every type of home service has strong, consistent demand.
Dublin has a temperate maritime climate with relatively low rainfall by Irish standards (approximately 750mm annually), though this still exceeds most UK and continental European cities. The east-facing position means less rain than the west coast but more exposure to cold easterly winds in winter, which can affect heating demand and frost risk. Sea proximity moderates temperature extremes. South-facing properties benefit from good solar exposure, making Dublin viable for solar PV installations. Urban heat island effects mean the city centre is typically 1 to 2 degrees warmer than outer suburbs.
Ventilation & MVHR in Dublin: Local Insights
Dublin's housing stock is Ireland's most diverse, spanning from Georgian terraces in the city centre (1750s-1830s) through Victorian and Edwardian suburbs (1840s-1910s), inter-war and post-war council housing (1930s-60s), suburban estates (1960s-2000s), Celtic Tiger apartments (1998-2008), and modern high-density developments. Each era presents distinct characteristics for home service providers: Georgian homes have solid brick walls, original timber floors, and sash windows. 1960s-70s suburban semis have cavity block walls, often with minimal insulation, and are the most common candidate for energy retrofits. Celtic Tiger-era apartments may have building defects from the construction boom. The sheer density and variety of Dublin housing means every type of home service has strong, consistent demand.
Dublin has a temperate maritime climate with relatively low rainfall by Irish standards (approximately 750mm annually), though this still exceeds most UK and continental European cities. The east-facing position means less rain than the west coast but more exposure to cold easterly winds in winter, which can affect heating demand and frost risk. Sea proximity moderates temperature extremes. South-facing properties benefit from good solar exposure, making Dublin viable for solar PV installations. Urban heat island effects mean the city centre is typically 1 to 2 degrees warmer than outer suburbs.
Dublin is Ireland's busiest market for all home services due to population density and property values. High demand means competitive pricing for standard trades but premium rates for specialist services. Property values drive significant investment in home improvements, with homeowners willing to spend more on quality materials and finishes. The four Dublin local authorities (City, Dun Laoghaire-Rathdown, Fingal, South Dublin) each have distinct planning approaches. Conservation areas are extensive in Dublin city centre, Dun Laoghaire, and parts of Fingal. Dublin prices for home services are typically 15 to 25% above the national average, reflecting higher labour costs, travel time, and material delivery costs in the urban environment.
SEAI Grants May Be Available
Some ventilation & mvhr work may qualify for SEAI grants. Visit HomeEnergyGuide.ie to check eligibility and amounts.
SEAI Grants May Apply
Some ventilation & mvhr work qualifies for SEAI grants of up to €8,000 or more. Check eligibility and current grant amounts on our energy guide.
Check SEAI Grants on HomeEnergyGuide.ieVentilation & MVHR Costs in Dublin
Typical costs for ventilation & mvhr in Dublin (prices may vary (typically 50% above national average)):
| Service | Typical Cost | Notes |
|---|---|---|
| MVHR system (new build) | €6,000 | €10,500 | Property size, ductwork complexity |
| MVHR system (retrofit) | €7,500 | €13,500 | Existing structure, access |
| Demand-controlled ventilation | €3,000 | €6,000 | Number of units |
MVHR costs depend on the brand and model (Zehnder, Vent-Axia, Beam, and Daikin are common in Ireland), the size of your home (determining the unit capacity), and whether it is a new build (ducting installed during construction) or a retrofit (ducting must be routed through an existing house, which is significantly more complex and expensive). Retrofit MVHR is typically 40-60% more expensive than new build installation due to the difficulty of running ducts through finished ceilings and walls. Demand-controlled and positive input systems are considerably cheaper.
Areas We Cover in Dublin
Ventilation & MVHR FAQs for Dublin
An MVHR system costs €4,000 to €7,000 in a new build (where ducting is installed during construction) and €7,000 to €12,000 in a retrofit (where ducting must be routed through an existing house). The cost depends on the brand, unit capacity, and the complexity of the duct layout. Demand-controlled ventilation (DCV) costs €1,500 to €3,000. Positive input ventilation (PIV) costs €500 to €1,500.
In a well-insulated, airtight home (air permeability below 5 m³/hr/m²), MVHR is essential for maintaining healthy indoor air quality while recovering up to 90% of heat that would otherwise be lost. It prevents condensation, mould, and stuffy air. In a leaky, poorly insulated home, MVHR is not cost-effective because air enters through gaps rather than through the heat exchanger. For these homes, demand-controlled ventilation or PIV is a better starting point.
Filters should be replaced every 6 to 12 months (more frequently if you live near a busy road or in a dusty area). The heat exchanger should be cleaned annually. Ducts should be inspected and cleaned every 3 to 5 years. Annual professional servicing costs €100 to €200. Most filter replacements are straightforward enough to do yourself, keeping ongoing costs low.
A properly installed and commissioned MVHR system operates at 25 to 30 decibels on normal speed, which is quieter than a whisper and virtually inaudible in a furnished room. Noise problems are almost always caused by poor installation: undersized ducts, uninsulated duct runs, the unit mounted directly on joists without vibration isolators, or incorrect fan speed settings. Insist on proper commissioning.
A bathroom extractor fan removes moist air from one room and expels it outside, losing all the heat it contains. MVHR is a whole-house system that continuously ventilates every room while recovering 85-90% of the heat from the extracted air. MVHR also supplies filtered fresh air, removing pollen, dust, and pollution. It is a fundamentally different level of ventilation and air quality.
Yes. Condensation and mould in insulated homes are caused by trapped moisture that has no way to escape. MVHR continuously removes moist air from kitchens and bathrooms and replaces it with dry, filtered fresh air. In homes where condensation and mould have been a persistent problem after insulation, MVHR almost always resolves the issue completely.